Motor boats of thePROFI Series

If you want more speed, more power, better controllability, or just want something new instead of your flat-bottomed inflatable boat - choose KOLIBRI  inflatable boats of the Profi series.
Benefits
  • durable and cut-resistant five-layer PVC fabric with a density of 950 – 1100 g/m2;
  • floorboard (folding flooring (sole-book));
  • two versions of floorboards: aluminum or plywood;
  • the interface is reinforced along the entire width with an aluminum profile;
  • additional reinforcement of the floorboards;
  • the main assembly units are welded using HFC (HFW) equipment;
  • keel lines reinforced with a 6 cm protective strake;
  • transom is made of film faced plywood;
  • overpressure valves to relieve excess pressure in the tubes;
  • sliding seats – install it in the most convenient position;
  • rowing equipment with enhanced hydrodynamic characteristics;
  • bow roller with the anchor rope fastening;
  • monolithic transom mounts
Equipment
Standard equipment
  • Boat
  • Oars
  • Seat
  • Floorboard (folding flooring (sole-book)) КМ-245D – KM-280D
  • Plywood floorboard with stringers KM-300D – KM-360D
  • Pump
  • Repair set
  • Manual
  • Bag for boat
Optional equipment
  • Removable soft seat
  • Under-seat bag
  • Bow bag
  • Protective canopy
  • Bimini Top
  • Overall cover
  • UFB (Universal Fixing Block)
Color solution
green
green
dark gray
dark gray
light gray
light gray
green
dark gray
light gray

Motor boats “Profi” – for professionals and beginners

In the modern world of high-speed motor boats, the Ukrainian shipbuilding company KOLIBRI defines a new standard by presenting its “Profi” series. These keelboats are not just sleek and efficient – they are built for the highest level of performance and comfort, safety and enjoyment of water travel. Let’s take a closer look at what exactly makes them special.

Engineering for speed and comfort

Boats of the “Profi” series represent an ideal combination of speed, maneuverability and comfort. The hydrodynamic design of the hull, conical stern tubes provide impressive speed characteristics and ease of handling. A motor with a capacity of up to 20 hp. is attached to a stationary transom, which is supported on monolithic supports. The transom is made of reliable moisture-resistant laminated plywood.

One of the key features of these boats is the inflatable keel, which is inflated separately. This not only increases directional stability, but also allows the boat to go into planing mode. This means you can enjoy great speed while using fuel efficiently. The lines of the keel are reinforced with a protective beam of 6 cm. Confidence in turns, headwind and splashes of water shining in the sun will not leave you indifferent.

Durability and safety

Boats of the “Profi” series are made of strong five-layer PVC fabric with a density of 950 to 1100 g/m², which provides high resistance to cuts and other damages. Additional reinforcement of the floorboard with an aluminum profile at the place of installation of the stringers guarantees the strength of the hull and course stability. Also, along its entire width, the joints of the floorboards parts are reinforced with an aluminum profile. Traditionally, welding of all parts of the body is carried out on high-frequency current installations.

In the parking lot, you will find a bow roll with an attachment for an anchor rope useful.

It is possible to choose different types of bilge floorings – lightweight 9 mm folding flooring sole-book, wooden or aluminum floorboard with 12 mm stringers.

You can also always choose safety vests of our own production KOLIBRI, this guarantees you and your companions safety on the water.

Compactness and flexibility

In addition to technical advantages, “Profi” are also famous for their compactness. Quick assembly and disassembly, inflation of tubes using the pump included in the kit, sliding seats – all this makes “Profi” boats convenient for transportation and storage in small spaces. An overall cover and a bag for boat are also sure to come in handy.

A wide selection of models and additional equipment

This series of boats offers a wide selection of six models ranging from 245 to 360 cm in length and 144 to 160 cm in width so that everyone can find the optimal size for their boat. Passenger capacity – from two to five people. High carrying capacity and reliable construction make “Profi” an excellent choice for various types of water entertainment.

You can also choose a variety of accessories and additional equipment for boats of this series, such as a protective canopy or bimini top, locker bag (bow or under-seat), removable soft covers, a holder for spinning, navigation equipment or fishing echo sounders.

A new level of support and service

KOLIBRI company is known not only for its boats, but also for high-quality service and warranty. A wide dealer network will provide you with access to service and additional equipment to make your adventure on the water as pleasant and safe as possible.

Final thoughts

The series of motorized inflatable boats “Profi” from KOLIBRI is design and engineering mastery, comfort and safety in one package. Whether you’re into the adrenaline rush of speed or a leisurely water ride, these boats will take your water experience to the next le

Our Dealers